The method we use for cleaning is hot water extraction, commonly referred to as steam cleaning. Everclean’s exclusive hot water extraction method removes the toughest, deepest dirt safely and gently. Hot, soft water and a specially formulated cleaning solution are injected deep within the carpet fibers. Then, a powerful suction extracts deep-down dirt, allergens, cleaning solution and 95% of the moisture. It’s the cleaning method most recommended by carpet manufacturers.
A light vacuuming in the traffic areas is recommended but not required. If needed, the crew can pre-vacuum the area to be cleaned. Also, the equipment is vacuuming the entire time we are cleaning.
Typically, an area is a room that is up to 300 square feet (that is 15 x 20 or approximately the size of a two-car garage). Living room/dining room combos are considered two areas. Any area over 300 square feet but less than 600 square feet is priced as two areas. Non-standard areas (baths, halls, landings, walk-in-closets, etc.) are priced separately from the standard areas, usually at a lesser price. Please know that these room sizes may vary by location.
When comparing amount, make sure you ask a lot of questions and please keep a few things in mind. Our price includes treating for spots, moving furniture, and a 10-day satisfaction policy. There are no hidden fees or additional charges. Also, we never sub-contact, so our journey person are always background checked, drug tested and properly trained Everclean employees. This is what allows us to stand behind all of our work.
As the finishing touch to your thoroughly cleaned carpet and/or cushioning, specially formulated protector can be professionally applied. These products help carpet and cushioning resist soiling from dry dirt, water- and oil-based spills by protect each fiber in a protective coating. This extra layer gives you more time to clean up spots and spills before they soak into the fibers, helping you keep your carpet and cushioning looking its best between professional cleanings. Plus, it makes vacuuming and cleaning up spots easier.
A dry soil protector comes on most carpet from the builder. This is a wear dated product and is removed over time with every day traffic. Carpet manufacturers recommend that you have this protector reapplied about once a year, and perhaps more often on heavy traffic areas.
Everclean Odor Out Plus uses a natural bacterial spur action to digest organic odor sources such as vomit, feces, urine, milk, blood, etc. This product removes organic odors that it contacts. It also uses a neutralizer to give immediate relief from any odors while the spur is working. The key to complete removal of an odor is that this product must reach all contaminated surfaces. If the odor causing source has suffuse the backing and possibly the padding we cannot guarantee complete removal of the odor.
Manufacturers recommend having stuff furniture professionally cleaned every 12-24 months depending on use.
We use our powerful hot water extraction cleaning process whenever possible, because it give the deepest cleaning of all the possible methods. Some fabrics may require a more stipulate cleaning system. In this case, we will help you make a judgment that best suits your needs and your furniture.
Yes, we can. We’ll test your fabric to determine which cleaning method will be the protected and most effective. That tag, or “Manufacturer Liability Code,” is required to recommend “a” cleaning method even though it may not be the most effective method for removing soil.
While professional cleaning may impact the safe coating on your furniture, the dry soils that accumulate on it over time — along with the strain of daily living cause this coating to deteriorate. To keep your valuable stuff furniture protected from the damage of dry soil, we can re-apply this coating following cleaning
Your specific stuffing fabric will determine which cleaning method we use. While the cleaning method along with optional protector application determines the drying time, typical dry time ranges from 6-12 hours
Like any skin, leather needs regular care to retain its humidity and softness. Most store-bought leather cleaners and conditioners provide immediate relief but end up causing long-term damage. experienced products applied by professional technicians will keep your leather looking and feeling great for a long time.
Household cleaners contain silicones and lubricants that give an outer layer of protection but end up dehydrating and damaging your leather. Our experienced leather cleaners, moisturizers, and protestants provide long-lasting rejuvenation without the harmful side effects.
Do manufacturers recommend professional leather cleaning? If so, how often?
Yes, fabricator recommend cleaning every 6-12 months.
We can clean all types of leather, including dusky, aniline, nubuck, and suede.
Yes, in fact the leather in autos, boats, and RVs is exposed to more rough wear and more extreme weather conditions. These factors make additional care for your leather upholstery in these vehicles even more important.
At Everclean, we use a proprietary system to clean and mist your leather and we can also provide optional protector for your leather. We will begin by applying and removing a cleaner that removes damaging soils. Next, the leather is furious to open pores and accept the moisturizer that leaves your leather feeling as soft and supple as the day it was made. If you choose, we will then re-heat the leather and apply a savior that will actually fill in the cracks where soils typically settle, preventing future damage. All of these steps are completed by our fully trained leather care specialists.
Our professional cleaning removes soil but it cannot correct the harm that soil has already caused. We can offer you a free demo that will help you understand the potential outcome of the cleaning, all at no cost to you. In extreme cases, some leather may need recovery in addition to cleaning.
Just like carpet, dirt builds up over time dulling your tile’s presence and discoloring your grout. A thorough, professional tile & grout cleaning is the only way to remove the deep-down dirt.
We use a high pressure rotary tool with dual spin jets. This is combined with the same truck-mounted steam/pressure cleaning we use to deep clean your carpet. We use tile and grout specific cleaners that strip away any waxy build-up and remove the dirt fixed in the grout lines.
As with rug, many factors must be considered when determining the frequency of cleaning. Foot traffic, children, pets, and routine floor maintenance will affect how often you need to have your tile & grout cleaned.
For an medium size room (up to 300 square feet), it typically takes 30–60 minutes to clean the tile & grout. This can vary based on a number of factors including the size of the tile, amount of soil in the grout lines, and room outline. If you choose to have sealant added, it typically takes 2–3 hours to complete the entire process.
Grout is a porous substantial that absorbs soil and spills, just like carpet. Having a sealant applied will help create a protective barrier, giving you more time to clean up dirt and liquid spills before they wash into the grout. The type of sealant you choose will determine the degree of stain resistance.
We uphold that you wait 30 minutes before walking on the floor to allow the sealant to dry. It will take 24 hours for the sealant to cure completely, so we suggest that you avoid any liquid coming in contact with the sealant during that time.
To preserve the life of the sealant, we uphold that you use a neutral cleaner on your floor. Rinsing after mopping will also help keep your floors looking their best. You will want to avoid bleach and other harsh chemical cleaners as these can wear away at the sealant and origin it to break down prematurely.
Clear seal is an invisible layer of guard that penetrates into the pores of the grout. This gives you more time to clean up dirt and liquid spills before they soak into the grout, however, it is not waterproof.
Restore your grout to its original appearance with our prime Color Seal restoration service. Our Color Seal service will transform your discolored grout back to its original splendor by give a layer of uniform color to your grout lines, giving your floor a clean and refreshed look. Along with improving the cosmetic appearance of your floo
No, this service is only offered in specific area. To find out if it is offered in your area, please call +91 98432 72132 and speak with a Customer Service Advisor.
Dirt and junk may collect in your ventilation system blocking ductwork and key components of the furnace, including the evaporator coil and blower Build-up of these contaminants in the system can curb airflow causing it to work harder and longer, thus expending more energy. By cleaning the entire HVAC system, you may see an increase in the energy efficiency of your system, which in some cases translates to lower service bills. These cleanings may also extend the life of your furnace or air conditioning system by reducing wear and tear
Unlike many cleaners, Everclean cleans your entire system, including all cache and return vents, air dusting, as well as furnace coils, blower, drain pan and air filter. By cleaning the whole system, you avoid dirt and junk from areas that weren’t cleaned blowing back into areas that were cleaned as soon as you turn on your furnace or air conditioner. Many other air drubbing companies will only clean a few vents at a time, or won’t clean the furnace, and the vents end up getting recontaminated because the whole system was not cleaned at one time.
Surprisingly enough, yes. Construction junk is one of the most common types of contamination that we find in air dusting systems. Fine particulates, such as drywall dust or sawdust, as well as other substance, can make their way into your system when the construction crews are cleaning up. The only way to thoroughly remove all of these pollutants from your system is through professional cleaning.
Regular mopping just doesn’t reach the fixed dirt that lies deep in the pores of your floor, but our cleaning process does. This process includes an initial vacuuming of the areas to remove any loose dirt and junk, an auto scrubbing with an alkaline cleaner and then another auto scrubbing with a neutral cleaner to return the floor to its initial sheen. Edges are hand scrubbed, as are stairs.
Clean & Maintenance Coat
Clean and care Coat your Floor with a combination of our deep cleaning and an application of our floor floor refinisher. First, we remove dirt and debris with our cleaning process, then we’ll coat your floors with our care Coat solution. Our fast drying care Coat will leave your floors with a uniform, overall sheen. When cleaning just isn’t enough, refinish your floor with our Maintenance Coat process.
Clean & Poly Coat
Clean and protect your floor with Everclean’s Poly Coat technology. Our durable, quick-dry Poly Coat will provide a careful layer to your floors. After our deep cleaning process, we will coat your floor with an even layer of our Poly Coat solution, creating a barrier against water and chemical blow. In addition to helping your floor resist scratching and scuffing, it will leave your floor with a consistent shine. Keep your floor protected and looking good longer.
We are available 24 hours a day to help you knob your water emergency. Just call our 24-hour call center at +91 98432 72132 and our Customer Service Advisors will have a certified restoration specialist get in touch with you right away.
Advise you of what to do to minimize blow until our crew arrives.
Dispatch certified, trained, and experienced water blow crews to your home within three ours or less.Pump out freestanding water quickly, and then extract water from carpet, padding, and filling.
Remove carpet and padding if deemed necessary. We will then clean, dry, and reinstall carpet and padding based on IICRC standards.Provide professional grade machinery for a controlled drying process of your home and its contents—this minimizes the possibility of secondary damage and potential microbial growth.Use specialized gadget to locate hidden pockets of water and to technically monitor the dehumidification/drying process.
Work directly with your insurance company to process case and get your home back to normal as soon as possible.Make sure your home’s structure and contents are dry, to the recommended industry standards for your area of the country.